The Account screen no longer prints our bank account number to everyone who opens it. It was written into a sentence shown to every user whether or not they were buying anything, which is payment detail put in front of someone who has not said they are paying.
Choosing a plan and choosing how to pay are two separate steps now, and both live on the plans page. That is where the amount can be shown for the plan you actually picked, and where your payment reference belongs. The app tells you the transfer route exists and sends you there, and carries no account number at all.
Everything in 1.0.24 is included. If you are coming from 1.0.23, see those notes as well.
Alerts now update themselves. The Watches screen refreshes about once a second while you are looking at it, so the countdown, the live price and the drift move on their own and you are not pulling to refresh to find out whether anything changed. That was the actual complaint and it was a fair one.
What the word “live” can honestly mean here, because it is worth being exact. Two separate things were slow. The screen not updating itself was ours, it was free to fix, and it is fixed. How fresh the PRICE is belongs to the data provider, and a closed one-minute candle reaches us about twenty seconds after that minute ends. We measured it: at every check up to sixteen seconds past the minute the bar was still missing, and it was reliably there by twenty-three. So the price can be up to roughly that old however often we ask, and asking every second would have cost sixty provider credits a minute for a single pair against a ceiling of fifty-five for everything the app does, to redraw the same number twenty times. We ask every five seconds, and only for pairs somebody currently has open.
The drift line under an alert is an observation and nothing else. It says how far price has moved since the alert, in pips, in the direction the alert called. It does not change the alert, re-order anything, hide anything or predict anything, and a drift going the right way is not evidence the read was right. It is there because you could already see it by watching your broker, and having to switch apps to see it was the only reason it was not on the card.
New: “I did not take this”, for a trade you logged by mistake. Tapping “I took this” on the wrong card used to be permanent, which meant the honest options were to leave a trade you never placed in your record or to ask us to delete it.
It has one hard limit, and the limit is the point. A trade that has already settled cannot be removed. That is enforced by the database itself rather than by the app, so no future version of the app, and no mistake by us, can get around it. If a settled trade could be removed, every record on every card would become a number you can edit once you know how it turned out, and then none of them would mean anything. Before it settles, a mis-tap is just a mis-tap and you can take it back.
A removal is recorded as a removal with the reason, not erased. Your counts and rates are worked out from what you actually took, and the removed row stays visible as history.
Session history. Every session you have finished, with what you planned, what you did, and the trades in it. Previously a session ended and took everything in it with it.
The session setup screen is readable now. It was five cards of explanation with the Start button underneath all of it. Every paragraph was true and worth saying, and together they meant reading for a minute before starting something you already understood. The paragraphs are not gone, they are under “What these do”, word for word. One thing is deliberately still on the screen rather than inside the disclosure: Quantlow cannot stop a trade. Your broker already has it by the time you tell us. The toggle is called “warn me firmly” because that is all it can do, and anyone who never opens the disclosure still needs to know that.
The correction promised in the last build’s notes is done. The Performance page says “Break-even at your 92% payout” and names the rate it used, worked out from the median of the payouts you actually logged. We had changed it to “the assumed payout” in 1.0.23, which was wrong of us: that figure was always yours, and it is left blank rather than guessed when you have logged none.
The money editor in the floating bubble takes a stake and a payout where you are already looking, instead of sending you to another screen to record what you just did.
Plans and upgrading now work from inside the app, and the limits shown come from the server rather than being typed into the app, so the page cannot drift out of date from what your account actually allows. What a paid plan buys is access, limits and tools. It does not buy better reads, and no plan is unlimited, because every scan costs real money at the vision provider.
Watch alerts now carry the same measured record the signal cards carry: what reads like this one have actually done, with the sample size. A watch alert had no record at all before, on the grounds that it had none of its own and borrowing the signal feed’s would be an overclaim. That was right about the borrowing and wrong about the absence. A watch alert is the same engine’s read, it settles into the same tables, and it was already being scored. The line was simply never shown to you.
Fixed, and this one was telling you something untrue. The binary alert card read “Needs 56% of these to win, at your payout, just to break even.” That number was never your payout. It came from the configured default, so the card was showing an assumption back to you as your own figure. It now says “at your 92% payout” only when a live session actually recorded one, and “at the standard 80% payout” otherwise.
Gold is measured as gold. Until now every non-binary record pooled gold in with the currency pairs, so a gold alert printed a number earned by EUR/USD and friends and labelled it gold. Gold has 14 settled reads of its own, below the minimum sample, so gold cards now say “New setup, building its record.” That is less satisfying and it is the truth: gold’s own 14 reads won 4, well below the 40% the borrowed figure was showing you.
New: a heads-up when something is scheduled. Alerts say when a high-impact release is due within the next half hour for either currency of the pair, for example “US 3 releases in 20 minutes”. Where several land in the same minute it counts them rather than naming one, because the calendar does not rank them and picking one would imply it was the one that mattered. Gold uses US events, since it is priced in dollars.
Alerts also say when either currency has a bank holiday, because the market is thinner than usual. A daylight-saving clock change is filed under the same heading by the calendar we read and is deliberately NOT reported as a thin market, because it is not one.
Both of those are information and nothing else. They do not hide an alert, hold one back, re-order anything or change a single number. Reads near the news look obviously worse, and so did reads on a barely-moving market, which we measured: those tie more often rather than lose more often, so filtering them would have cost money. Every read now records whether it fell near an event, so the question gets answered with evidence instead of instinct.
Correction to this build: we also changed the Performance page from “Break-even at your payout” to “at the assumed payout”, and that was a mistake on our part. That figure was always yours: it is worked out from the median of the payouts you actually logged, and it is left blank rather than guessed when you have logged none. The next build restores it and names the rate, so it reads “Break-even at your 92% payout: 52.1%” and you can check it.
In the floating bubble, the scheduled-event line appears on every alert, because “US 3 releases in 5 minutes” while you are about to place a one-minute trade is exactly what the bubble is for. The measured record appears only when there is a single alert: it is two lines, and on a stack of three it would push the pair and the clock down the card, and those two have to stay the loudest things there.
The Session warnings now reach you at the moment you log a trade, wherever you log it: a watch alert, a forex alert, the performance screen or the home-screen widget. Before this they only appeared if you opened the Session screen yourself, which is the one place you are not looking while you are trading.
They warn and then get out of the way. Quantlow never places a trade, so everything you tap in this app is a RECORD of something your broker already has, and blocking it would not stop a trade, it would only stop the trade being measured. The earlier wording suggested the app could hold a trade back. It cannot, and it no longer says it can.
If you asked to have your alerts held once you hit your planned number of trades, the Session screen now says so at the top: “Alerts paused until you end this session”. It also says the two things that matter beyond the fact itself, that everything is still being recorded and scored as normal so nothing is lost from your record, and exactly how to lift it. A pause you cannot find or lift is not a tool.
The confidence percentage is gone, from every screen, the home-screen widget and the alert notifications. It is not hidden or demoted, it is removed. That number was the engine rating its own read, and we measured the rating against settled outcomes: across 1,174 settled binary trades the four setup groups all sit within a few points of a coin flip. So a card reading “69%, SOLID” was promising an edge the record does not support. Worse, the group the engine rated highest was not the best one, so the number was not merely uninformative, it pointed the wrong way.
In its place, what setups like that one have actually done: “Setups like this won 7 of 10 (37 trades)”. The sample size is always there, because a rate without one is not a measurement. Below the minimum sample it says “New setup, building its record” rather than inventing a figure.
Underneath it, the bar that record has to clear: “needs 6 of 10 to break even”. Without it a low number is ambiguous. Three of ten is losing at 1.4 to 1 and perfectly fine at 3 to 1, and nobody should have to work that out from the card.
On binary the record is one number for the whole market, and the card says so. The four setup types have not been measured to differ, so showing four separate labels over one number would be a distinction the data does not support. On forex the groups genuinely do differ, so those are shown separately.
The record is deliberately not colour-coded by how good it is. A green seven-of-ten beside a red three-of-ten would put the app back in the business of grading a setup for you, which is the habit the confidence number taught.
New: Session, under Account. Set how many trades you plan, your broker payout and your usual stake before you start, and the app tracks the session against them.
The trade count is the first thing it asks and it starts empty, labelled “No limit”. We replayed the whole broker history through every stop rule we could think of, and the only thing that reliably helped was taking fewer trades, because the average trade loses and so volume is the cost. That is arithmetic about how many you take, not a view on which ones, and the limit is yours to set rather than ours to suggest.
Your payout now changes what the cards say. At 80% you need 6 of 10 to break even, at 92% you need 5 of 10, and the same record of 5 of 10 is losing under one and level under the other. Until you enter it, cards say “the standard 80% payout” rather than treating 80% as yours, because an assumption should never be shown back to you as your own figure.
It will tell you when a stake is 1.5 times the size you planned. A bigger stake does not change how often a setup wins, it changes what the next loss costs.
It will tell you when you have had three losses in a row, and then tell you that this says nothing about the next trade. We checked your own history for the streak everyone believes in: 50.0% of trades after a loss lost, against 50.0% after a win. The losses do not cluster. So the app shows you the run and refuses to read anything into it, and a run of losses never locks you out, whatever else you have switched on.
Locking yourself out is off by default and only you can turn it on. Everything else warns and then gets out of the way.
If you are ahead, it says so and offers stopping as a choice, and says plainly that we have no measurement showing that stopping while ahead earns more than carrying on. It is advice, not a saving we are claiming.
Where a logged trade has no amount against it, the session result says so rather than showing a partial figure as the day's total.
Fixed, in a sense: the free plan advertised “Dual-engine signals”. The two AI engines have been unavailable since early August and every signal since then has come from the rules engine. The scan card also described the rules engine as a stand-in used “while the AI engines are unavailable”. It is the engine, and it now says so.
Watch alerts no longer show a confidence figure. They have no settled record of their own yet, and borrowing the signal feed's would be a different kind of overclaim.
Fixed: recording a forex result never worked, for anyone. Two separate faults made the same error, “a trade cannot be closed before it was entered”. The first: when you came back to say how a trade ended, the app sent its own clock for the closing time, and the server compared that against the current moment instead of against the entry time it already had. A phone's timestamp is always a fraction of a second behind by the time the request lands, so every close was refused. The second: the entry time was stamped the moment you tapped “I placed this”, which is right for a one-minute trade and wrong for one that runs for hours.
You now enter the times the trade actually opened and closed, in your own clock with the time zone named, so you can copy them straight off your broker's statement. Leave the closing time as it is and the server stamps it, which is the honest default for “it just closed”.
After you record a result it tells you what went in, including the R worked out from your prices. That is the number that catches a price typed into the wrong box, and one was: an entry price in the exit field would have recorded a flat trade without a murmur.
A settled trade now shows its result properly: the outcome in words, both prices, both times and the R. It used to show the raw word the database stores and no exit price at all, so there was no way to check on the card that what you typed was what you meant.
The four outcome buttons fit. “Break-even” was being squeezed into a single letter per line down the side of the screen.
Old forex alerts move out of the way. An H1 plan stops being actionable when its hour is out, and the screen went on offering “I placed this” on alerts from five hours earlier. Live ones are at the top; the rest fold into a list you can open. Anything you have taken and not closed stays at the top, because an open trade still needs closing.
“No measured record yet” appears once, above the list, instead of on every card. It is one number for the whole forex test, and repeating it made a single fact look like a finding about each alert.
The experimental banner is gone from the forex screen. Nothing about the claim has changed: the record line still says in plain words when there is no measured edge.
Messages clear themselves after a few seconds rather than waiting to be dismissed, and on the forex screen they now appear at the bottom where you are looking. Before, a confirmation went to the top of a long scrolling list, so submitting from a card further down looked like nothing had happened at all.
Fixed: the bubble never let go of a forex alert. Only binary rows checked whether the trade had been logged, so a forex trade recorded on the Watches screen sat in the bubble for the rest of its hour still offering itself. Expired plans are also kept out now rather than appearing for a moment on every restart.
Fixed: the bubble claimed “25th read on this pair”. The count was adding to itself on every refresh, so it was measuring how often the app checked rather than how often the market did.
New: a forex home-screen widget. Pair, direction, entry, stop, target and how long the plan stays valid, with no countdown anywhere on it, because an hourly setup wearing a one-minute face is a trade placed on the wrong horizon. Tapping it opens Watches already on forex.
Gold can be watched on forex now, on the same experimental terms as everything else. It was kept out for being the worst instrument on our record; that turned out to be a measurement error on our side. Gold prices and its risk are shown in dollars, not pips — a live gold alert once read “risk 222721.8 pips”, which was dollars divided by the wrong unit. A gold watch may go several days without an alert; that is the instrument, not a fault.
The pair is the biggest thing on a bubble row and on a forex card, larger than the direction. Similar tickers sit next to each other on a broker's list and are easy to mis-tap.
A trade logged in the app now clears from the bubble too
Fixed: a trade logged in the app left a “Saved” row sitting in the bubble for ever. The bubble only retired a row when the result was recorded on the bubble itself, so anything resolved on the other surface came straight back on the next refresh. A resolved trade now retires its row wherever it was resolved, which is what the sync was supposed to mean.
The bubble becomes a stack: every live alert gets its own row, clock and button
The bubble is a small stack now. Watching three pairs means three alerts can be live at once, and it used to show one and silently drop the rest. Collapsed, it shows the most urgent with its ring, and a badge tells you how many are waiting. Tap it and you get one row per alert, most urgent first, never more than three.
Every row has its own clock and its own buttons. That is not a style choice: one shared button over a list logs the trade against whichever alert the app thought was current, and a fill on the wrong alert is a made-up entry time in the one record built to measure entry times.
Binary and forex rows look different on purpose. Binary shows a countdown and the buttons; forex shows entry, stop and target with no clock, because an hourly setup that looks like a one-minute trade is a trade placed on the wrong horizon. Forex fills are logged in the app, where the broker's own prices can be entered properly.
The same pair firing again in the same direction updates its row and marks it “2nd read” rather than taking a second slot. The same pair firing in OPPOSITE directions shows both, marked “Conflicting: consider skipping”, because the engine disagreeing with itself is a warning and not something to hide.
A second alert arriving while one is still live gives a short double buzz rather than the full alert tone, so you know another has landed without being startled or unsure which one just fired.
When an alert is logged or its window closes, it drops off and the next moves up. The badge goes when only one is left.
The bubble and the Watches screen are now one thing in two windows. Log a trade in the app and the bubble knows before you can look at it, and the reverse. They used to poll separately and each kept its own idea of what had happened, so tapping “I took this” in the app left the bubble still offering to take the same trade.
The bubble now takes its state from the record on the server rather than from whichever button was last pressed on it. That is what makes the sync real instead of merely fast.
A signal that closes with nobody having taken it sends the bubble straight back to waiting for the next one. It used to leave a dead card sitting over whatever you were looking at. You can still log a trade you placed at the last second: that lives on the settling row in the app, which is where a record belongs.
The Quantlow mark in the bubble is pure white. At its size a dimmed white read as switched off.
The floating bubble can be dragged. It is moved by a touch listener on the window, because the bubble is dragging the very window it lives in and the usual gesture handling cancels itself out in that situation. The watch bubble had a tap handler sitting on top of that listener, and Android gives the window listener only the touches nothing above it took. So the tap worked and the drag was never received at all, which is why it looked frozen rather than broken. Drag it anywhere, shove it against an edge to tuck it away, and drag it onto the target at the bottom to dismiss it.
Alerts arrive instantly, closed windows step aside, and the bubble is redesigned
New alerts appear the instant they are sent. The push already arrived immediately and the app was throwing that away, waiting for its next poll: up to a minute, which on a 60-second trade meant the card could appear after the trade was over while the notification had already buzzed in your hand. The list now reacts to the push itself, with a three-second check underneath in case a push is dropped.
The moment a window closes, the alert moves to Settling. It used to stay in the live list for five minutes as a full-size card marked CLOSED with the countdown running backwards past zero, which is the most confusing thing this screen did. If you took the trade you tap “I took this” when you enter; if you did not, the card simply steps aside.
You can still log a trade you placed in the last seconds of a window. That is now offered quietly on the settling row instead of by keeping a live-looking card on screen.
Countdowns read in minutes and seconds everywhere. “110s” made you do arithmetic at the moment you had least attention to spare.
The floating bubble can be moved again. Dragging it always moved the window, but the tap and the tuck were still talking to the scanner bubble's controller rather than the watch one, so the watch bubble looked frozen: it went where you put it and then ignored you.
The bubble is redesigned. The ring around it IS the countdown, draining as the window closes and turning amber in the last ten seconds, so the trade reads at a glance without focusing on a number. Expanded, it now uses the same direction colours, mono figures and draining bar as the Watches screen, and shows the brand mark rather than a letter when nothing is live.
The bubble stops counting, stops offering a dead trade, and fits on the screen
Fixed: the floating bubble counted for ever. An alert whose window had closed half an hour earlier still read as live, one clock climbing past 1700 seconds and the other cycling 0 to 59 without end. Both clocks now stop when the trade does, the card says the window is closed, and an old alert takes itself off the screen after ten minutes.
Fixed, and this one mattered more: the bubble kept offering “I took this” long after the trade had passed. Logging a fill against a window nobody could have traded is worse than no record at all, because the entry time is the one thing that table exists to measure. The button is now withdrawn the moment the window shuts, with ninety seconds of grace for a trade placed right at the end.
The bubble never knew which trade it was advertising. It was looking for one name for the 60-second method and the server was sending another, so it always showed the engine's window and time since the candle closed. It now shows “Place now” and counts from when the alert actually arrived, which is the clock that method trades on.
The expanded bubble is much smaller. It covered the top third of the screen with two clocks, a note explaining why there were two, and three lines of small print. It is now the pair, one countdown, the price and one button. The longer explanations are still in the app and in Telegram, where there is room to read them.
Fixes the watch-bubble crash, the status-bar overlap and the watch count
Fixed: turning on “Float alerts over other apps” crashed the app. The bubble shares a service with the scanner, and that service was declared to Android as a screen-capture service. The watch bubble deliberately captures nothing, so when it started, Android asked it for a screen-capture permission it does not hold and killed the app. It is now declared honestly as a floating alert window, and if Android ever refuses to start it the bubble turns itself off and says so instead of taking the app down.
Fixed: the Watches screen sat under the status bar, with the first row tucked behind the clock.
Fixed: the watch count read “6 of 3”, and a pair could appear twice. Binary and forex watches live in one list now, and the screen was counting both against the binary limit. Each market counts its own.
The loading animation is much larger. It was drawn small enough to read as an afterthought rather than as the app's own mark.
On the web, the bottom bar on a phone now matches this app exactly: Signals, Watches, Performance, Account.
Watches gets its own tab, performance split by source, and forex watches for testers
The bottom of the app is now Signals, Watches, Performance and Account. Watches has its own tab instead of living inside a menu, and everything to do with your account has moved behind one place.
Performance is split by where the trade came from: signals, watches and scans, each with its own record. One overall win rate was averaging three things that do not behave alike, and watches were missing from it altogether because a watch alert is shared between everyone watching that pair and never reached your own outcomes.
The Watches section shows two columns side by side: what you logged, and what our own settlement priced for the same alerts. Where they disagree, it says so and counts it. That gap is the most useful number on the page, because when our answer and your broker's answer differ, the broker's is the fact and ours is the estimate.
Every rate now carries how many trades it is based on, and no rate is shown at all below ten decided trades. A percentage reads as a claim however carefully it is worded, and on nine trades there is no claim to make.
Forex watches, on H1, for testers. Pick a pair and the system waits for an hourly setup on it, then sends the whole plan: enter at market, the stop, the first and second target, the reward-to-risk and how long the plan stays valid. There is no countdown, because an hourly setup does not expire at an instant.
Every forex alert is labelled “Experimental: no proven edge yet”, and that is not modesty. We measured three timeframes on years of history: fifteen minutes loses money, one hour is unproven, and four hours looked like the best result we had until a wider test found it fading year on year. There are no four-hour watches for that reason. Use a demo account.
Forex alerts carry no confidence percentage. The engine still calculates one, and we deliberately do not show it: a number next to a read with no proven edge reads as a promise.
Log what your broker actually gave you on a forex trade, including the prices, and we work out the R ourselves from those prices and keep both. Where your broker's number and ours differ, that is recorded rather than quietly corrected. Collecting those is the entire reason forex watches exist.
The loading animation is the web app's own: the Quantlow mark with rings rippling out from it.
Pair histories when you choose, payout capture, and longer to log a trade
Picking a pair now shows what that pair has actually done, like “7 in 10 alerts ended too close to call”. Nothing is hidden or filtered out, and a pair with too little history says so instead of guessing.
Record what your broker paid on each trade. The app then shows the win rate that trade needed just to break even, and remembers the rate per pair so logging stays two taps.
Every alert now shows the win rate it needs to break even, next to its confidence.
You get five minutes to log a trade you took, instead of ninety seconds, and its result whenever it closes.
Fixed: a trade you had taken could disappear from the list before you recorded how it went.
Settled results show all five outcomes, and stop miscounting losses
Fixed: settled alerts showed a mangled badge. The engine grades a read as one of five outcomes, and three of them are losses: it never went your way, it went your way then turned back before the expiry, or it was still wrong at the expiry but turned right just after. The app only recognised two of the five, so the rest printed their internal name in full and wrapped into a blob.
The same mistake was silently miscounting. The summary line counted only outcomes it recognised, so a day with three losses in it could read "7 settled · 2 won · 2 too close" and never mention them. It now counts every one.
Open a settled alert and it tells you which kind of loss it was. "A shorter hold would have won" and "a longer hold would have won" are different from "price finished the other way": in the first two the read was right about direction and the window was the wrong length.
Settled results are now shown by default rather than hidden behind a tap, with the four most recent visible and the rest one tap away.
The Watches screen rebuilt around the live call, and fills that stay logged
The Watches screen is rebuilt around what you can actually do. A live entry window is now the biggest thing on the screen, with the countdown as the headline and one button under it. Everything that has already happened is a quiet one-line row underneath, and the whole day's history folds into a single summary you can open if you want it.
Why it matters: every alert used to be an identical card in one long list, so a call with ninety seconds left looked exactly like a trade that settled last night. On a window that is over in two minutes, a screen you have to read carefully is a screen that costs you the trade.
Setting a watch no longer means scrolling to the bottom. Your watches, how long each has left, and the button to add another are the first things on the screen, and picking a pair opens over the top instead of sending you past every alert of the day.
Fixed: a result you logged could vanish before it was saved. The app refreshes your logged trades every fifteen seconds, and a refresh that started before you tapped could land after it and wipe the tap. Because the Won / Lost / Refund buttons only appeared once a logged trade was known about, the card was then left with no buttons at all. That is the bug behind trades that could not be logged.
Fixed: recording how a trade paid is no longer refused hours later. The three hour limit exists to protect the entry time, which can only be known at the moment you enter. What the broker paid is knowable whenever the trade closes, so it is now accepted whenever you get to it.
The button to log a trade no longer disappears the instant the window shuts. You get ninety seconds of grace, clearly marked, because a trade placed in the last seconds of a window is a real trade and a record we never take is worse than one taken slightly late.
A failed action is no longer shown in green. A refusal used to arrive in the same confirmation banner as a success, so "this alert is too old to log" looked like "logged".
Confirmations clear themselves after a few seconds instead of sitting there until dismissed.
Colour now means one thing. Green is BUY, red is SELL, and neither is used for anything else. Every card is the same surface, and the one bright control on the screen is the one you are meant to press.
The scanner bubble tucks away, three home-screen widgets, notification prompts
The scanner bubble now tucks out of the way. Drag it anywhere and it snaps to the nearest side; flick it at a side and it slides behind the edge, leaving a small tab. Tap the tab and it comes back out. It remembers where you left it and whether it was tucked, so it is where you put it the next time you turn it on.
Why it matters: the bubble floats over the chart you are trading, and there was no way to get it out of the way without turning it off and losing your place. Tucked, it takes up about a fifth of the width it did and still shows you when a trade is running.
Three home-screen widgets. Latest signal shows the most recent read with how fresh it is. Watches shows what you are watching and how long each has left, with a badge on any that has fired. Live alert shows a running call with the seconds counting down to the window close, and says how many pairs you are watching when there is nothing live. Each one opens the screen it is about.
The alert countdown is labelled against the window close rather than as time left, and keeps counting past zero into negative. That is deliberate. Android will not let an app retire a widget at an exact moment without a permission we are not willing to ask you for, so for up to about half a minute after a window shuts the tile is still on screen. Counting past the close means it tells you that plainly instead of showing a stale number that looks live.
The widgets read what the app already knows rather than calling the server themselves, so they cost nothing to keep on your home screen. That also means they show what the app last learned, and they say so.
If notifications are off, the app now says so and offers one tap to fix it. On Android 13 and up that tap opens the system dialog directly. If you have already turned them down twice, Android stops showing that dialog, so the button takes you to Quantlow's own notification page instead of dumping you in settings.
It also detects the case where notifications are on but the watch alert channel itself is muted, which looks completely fine from the app-level switch while every time-critical alert arrives silently. That prompt goes straight to the channel.
A logged result clears its alert from the live list
Log a result and the alert clears itself. After you tap Won, Lost or Refund the card stays for a few seconds so you can see the result register, then leaves the live list. A finished trade no longer pushes a running one off the screen, which is the moment the list most needs to be readable.
Everything you logged is still there, under “Logged trades” below the live alerts, with the pair, the direction and what you recorded. Nothing is thrown away, it just stops competing for space.
Only a finished trade retires. One you tapped “I took this” on but have not resolved stays put, because it is still waiting on you.
A distinct alert sound you can recognise from your pocket
The alert sound is now an actual bell: struck twice, bright, with a short ring. The previous one was closer to a generic phone chime and defeated the point, which is that you should know a Quantlow alert from your pocket without looking.
Android freezes a notification channel's sound the moment it is created, so the new sound needed a new channel. Open the app once after updating and you will see “Quantlow watch alerts” in your notification settings; the older entries clean themselves up.
Watch alerts now have their own sound, so you can tell a Quantlow alert from any other notification without looking at your phone. On a two minute window, the seconds spent checking which app buzzed are seconds you cannot get back.
They also have their own entry in Android's notification settings, called “Quantlow watch alerts”. Tap “Change or mute” on the Watches screen to pick a different sound, silence it, or let it through Do Not Disturb.
Log the trades you actually take, in two taps. Tap “I took this” when you place a trade, then Won, Lost or Refund when it closes. Entry time is recorded at the moment you tap, because that is the only moment it can be known accurately.
Why it matters: the app settles each alert over the window the engine predicted, but that window starts before the alert can reach you, so what you actually trade is a different trade. Logging real fills is the only way to find out which version describes your results.
Refunds are counted separately from losses, never folded in.
Fewer alerts, and every one of them is tradeable. An alert is no longer sent if it reaches you with under 40 seconds left, or if its window is shorter than two minutes. Expect noticeably fewer than before: that is deliberate, not a fault.
Every alert is now a two or three minute window. Those are the only lengths that can be scored against the real price at the exact moment they expire, so the window you are shown is the window that gets measured.
Why one-minute alerts are gone: the price feed does not publish a finished minute until about 20 seconds after it ends, so a one-minute alert always reached you a third of the way through a window you could not place anyway.
Alerts arrive in bursts. After one lands there is roughly a 50-50 chance of another within the minute, and the home screen now says so, because the moment to stay watching is right after an alert rather than before one.
Alerts on the home screen, with how each one actually went
Watch alerts now appear on the home screen while their window is open, with the time left counting down. You no longer have to catch the notification.
See how each alert actually went. Every watch read is settled against the real price a minute or two later and shows Won, Lost or Too close to call, with the price it finished at.
“Too close to call” means price finished within half a pip of where it started, which is smaller than the spread you pay to enter. Nobody could have made money either way, so it is not counted as a win or a loss.
Alerts are shorter and say 2m 30s instead of 150s.
Set, see and cancel watches from Account › Watches.
Watch a pair and get told the moment it produces a short read
Watch a pair and get told the moment it produces a short read. Set a watch from Account, walk away, and the alert reaches you on Telegram and this phone with the direction, the entry and how long is left on the window.
Watches show what is running and how much time each has left, and you can stop any of them from the same screen.
Alerts carry the honest bar: what win rate the trade needs at your payout just to break even.
Gold is its own category, and the Performance win rate is fixed
Gold is its own category. XAU/USD no longer sits under Forex: the feed, the watchlist and the pair picker now separate Currencies, Commodities, Crypto and Binary.
Fixed the win rate on the Performance tab. It was showing a figure 100 times too large (5860% instead of 59%), and the same mistake was pinning the trend chart flat against the top.
Tap any past scan to see the full read: the chart it looked at, the verdict, the plan and what each engine said. The phone listed your scans but had no way to open one.
Add a profile picture, from Account. It shows up on the web dashboard too.
The live market banner is now a quiet scanning animation instead of a block of text.
Gold is selectable in the chart scanner’s pair list.
The app now tells you when a new build is out, on this page.
Fingerprint sign-in, and the whole dashboard on the phone
Stay signed in with your fingerprint. You enter your password once; after that the app restores your session from a key held in the phone’s secure hardware.
Scans, Performance, Watchlist, Learn, Notifications, Integrations and Subscription are all on the phone now.
Simple and Advanced views, matching the dashboard.
Expired signals leave the home feed the moment they expire, and live behind an Expired filter.
New loading identity: the Quantlow mark with rings rippling outward.